Skip to content
← Records

Built the tap-to-pay fare terminal for team 9two5 at MKSU Hackfest 2026, Machakos University

When

Nov 2026

Where

Machakos University (MKSU Hackfest 2026)

Role

Hardware and terminal firmware, team 9two5
Built the tap-to-pay fare terminal for team 9two5 at MKSU Hackfest 2026, Machakos University, photo 1 of 6 (opens full size in a new tab)Built the tap-to-pay fare terminal for team 9two5 at MKSU Hackfest 2026, Machakos University, photo 2 of 6 (opens full size in a new tab)Built the tap-to-pay fare terminal for team 9two5 at MKSU Hackfest 2026, Machakos University, photo 3 of 6 (opens full size in a new tab)Built the tap-to-pay fare terminal for team 9two5 at MKSU Hackfest 2026, Machakos University, photo 4 of 6 (opens full size in a new tab)Built the tap-to-pay fare terminal for team 9two5 at MKSU Hackfest 2026, Machakos University, photo 5 of 6 (opens full size in a new tab)Built the tap-to-pay fare terminal for team 9two5 at MKSU Hackfest 2026, Machakos University, photo 6 of 6 (opens full size in a new tab)
  • Situation: MKSU Hackfest 2026 ran from 18 to 20 November at Machakos University, with sponsors including ISACA Kenya Chapter and AWS User Groups AI/ML Kenya. My five-person team, 9two5, built a tap-to-pay fare system for matatus.
  • What I did: I built the hardware and the terminal firmware. I started on an Arduino Uno with an RC522 card reader, a 16×2 LCD, an RGB LED and a piezo, then moved to a wireless ESP32 that sends each tap over HTTPS to our server. Reusing one connection cut a tap from 4–5 seconds to about 1.2 seconds. The terminal keeps working offline and sends the payments when the server is back, and a lost card is refused on every bus. I also wrote a small tool to change the Wi-Fi, server and token over the USB cable, so the terminal works at a new venue without new code. My teammates built the server, the dashboards and the pitch.
  • Result: Built a working wireless fare terminal that answers a card tap in about 1.2 seconds, and demoed it at the hackathon. We didn't place, and we're waiting for the judges' feedback.
  • Lesson: We added "lock a lost or stolen terminal" without a way to unlock it, and locked ourselves out while testing. A kill switch needs a way back in before it ships.
embedded firmwareRFID/NFC card readingoffline-first synchardware debuggingsoldering